PROGRAMMING TOYOTA DOOR LOCKS

Written by gary on March 29th, 2010
468x60_staticbanner

Here is a brief Tutorial for Programming Toyota Door Locks with Programming Options Linked to Driver’s Door, Shift Lever, and Vehicle Speed…  a lock switch

Automatic Door Unlocking-Linked To The Driver’s Door

This will program all the doors to automatically unlock whenever the driver’s door is opened within 10 seconds after the ignition is turned from “ON” to the “ACCESSORY” or “OFF” position.

  1. Set the Parking Brake
  2. Make sure all doors are closed
  3. Place the ignition switch in the “ON” position
  4. Automatic Transmission Models Only- place the transmission gear selector in the “N” position (NEUTRAL)
  5. Within 10 seconds of turning the ignition to the “ON” position, press and hold the driver’s side power door lock switch in the unlock position (rear of the switch) for 5 seconds
  • All doors will lock and unlock to indicate that the programming was successful.
  • To cancel the programming, repeat the steps.

Automatic Door Unlocking – Linked To Shift Lever (Automatic Transmission Models Only)

This Will Program All The Doors To Unlock Whenever The Shift Lever Placed In PARK.

  1. Set The Parking Brake
  2. Make Sure All Doors Are Closed
  3. Place The Ignition Switch In The “ON” position
  4. Place The Transmission Gear Selection In The “P” position (PARK)
  5. Within 10 Seconds Of Turning The Ignition To The “ON” Position, Press And Hold The Driver’s Side Power Door Lock Switch In The Unlock Position (Rear Of The Switch) For 5 Seconds
  • All Doors Will Lock And Unlock To Indicate That The Programming Was Successful.
  • To Cancel The Programming, Repeat The Steps.

Automatic Door Locking – Linked To Vehicle Speed

This Will Program All The Doors To Lock Whenever The Vehicle Reaches A Speed Of About 12 mph.

  1. Set the Parking Brake
  2. Make sure all doors are closed
  3. Place the ignition switch in the “ON” position
  4. Automatic Transmission Models Only- place the transmission gear selector in the “N” position (NEUTRAL)
  5. Within 10 seconds of turning the ignition to the “ON” position, press and hold the driver’s side power door lock switch in the unlock position (front of the switch) for 5 seconds and then release
  • All doors will lock and unlock to indicate that the programming was successful.
  • To cancel the programming, repeat the steps.
Share and Enjoy:
  • Print
  • Digg
  • Twitter
  • Sphinn
  • del.icio.us
  • Facebook
  • Mixx
  • Google Bookmarks
  • Blogplay
  • email

Comments are closed.