HOW TO CHANGE A FLAT TIRE

Written by gary on December 18th, 2009
468x60_staticbanner
  ChristmasStory
 
There’s a great scene in the movie, A Christmas Story, where the family is in the car singing Christmas carols coming home from buying a Christmas Tree when suddenly there is an explosion outside the car, POW!…,and the vehicle comes to a staggering halt. Of all the things, it is what people feared the most back in the 1940’s…THE FLAT TIRE BLOWOUT!… flat tireI made a statement not long ago that no one ever has a flat tire anymore now that we are into the 21st Century.There was no wood around to knock on….So, There I was, Stuck with a flat tire in the middle of the road with no mechanic in sight!…3 times in the last 18 months!!! 
 
There are many people and young drivers today who have never experienced the dreaded flat tire or blowout.To avoid being helpless in such a situation, here are some simple tutorial instructions for changing a flat tire on your car. Changing a flat tire is not that difficult and with clear-cut steps, even you can learn how to do it.
 
What You Need                                              jack
  • Car Jack                                                                                       
  • Flashlight (in case its dark)
  • Lugnut Wrenches
  • Spare Tire
 *
Instructions to Change the Tire 
  • The car should be parked on a flat surface rather than a sloping one. If there is a slight slant, consider placing a brick or small rock behind the other tires, so that it doesn’t move. Apply the parking brake, put the car in gear and turn off the engine. Turn on the hazard lights to let other people know that you are doing some repairs.
  • Take out the spare tire, lug-nut wrench (tire iron) and the car jack. If necessary, remove the hubcap. After this, loosen up the lug nuts that hold the tire in place. The lug nuts should be loosened in a star pattern. When you loosen one, next one to be loosened should be located opposite to it. Make sure all the nuts are unscrewed and slightly loose before you get the car jack.   lug wrench
  • Very slowly and carefully, lift up the car with the jack. Make sure there is enough room to remove the old tire and also put the new, full tire on. For this, the car should be jacked up a little higher than necessary. Now, remove the lug nuts away and place them where you won’t loose any of them and they won’t roll away. Slowly remove the flat tire, which should be hanging by the studded threads. Keep it aside. jack up car
  • Get the new tire, lift it and place it onto the studs. To cross check, whether you have placed it properly, check for the air valve. It always faces out. Now, place the lug nuts back the way you unscrewed them. Tighten up each one slightly in a star pattern. Don’t tighten lug nuts located adjacent to each other. tighten up lugs
  • Slowly, bring down the car from the jack and remove it. Now tighten the lug nuts as much as you can. Place the hub cap back and you are ready to continue on your journey!
Be Sociable, Share!
 

Comments are closed.